From TMG Speed for the new Schumacher LD2 is this LiPo holder. Machined from high quality carbon fibre, this LiPo holder accepts all heights of packs and they are held in place with the included rubber o-rings. Its slotted mounting holes allow the pack, together with the holder, to be adjusted to the front or […]

MXLR have created this adjustable alloy servo arm to offer you a strong and reliable height adjustable servo arm which stands up to the highest competition demands. The 3mm range for the height adjustment of the ball stud is a huge setup option which you shouldn’t miss to play with. A higher turning point generates […]

New from T-Work’s are these custom 12mm tuning pistons. The pistons come with 2 sets of 4 hole indents that the user can drill out to the hole diameter of their choice. Available for both the Team Associated (blue) and TLR (red) brands. Source: T-Works [rc-tworks.com] FacebookTwitter The post T-Work’s custom 12mm tuning pistons appeared first on […]

Absima have announced that front running German offroad racer Kim Einert has joined their team. Kim will be powering her Kyosho buggies with their full line of CTS V3 electronics and will be an asset to the team with her many years of experience. On her new deal, Kim said ‘I am grateful to be […]

Exotek have introduced their new caster setting tool for their F1ultra chassis. Providing easy to read ‘pointers’ that tell you the caster degrees of the front steering knuckles when used with 1/10 TC type camber set up gauges as shown. Works with Hudy, Arrowmax, Integy and similar 1/10 TC set up stations. Source: Exotek [exotekracing.com] […]

Muchmore have announced that their new Impact Silicon Graphene FD4 6000mAh 14.8v 130C LiPo Battery is now ROAR Approved. This new 6000 4S LiPo battery was designed and tested by Muchmore factory driver Ryan Cavalieri to provide plenty of run-time for the 10-minutes A-Mains, while also improving the handling of his car with less overall […]

1up Racing now offer their new Lockdown M4 wheel nuts in 7 bold new colours. Vibrant anodising and a bright silver outer chamfer instantly improve the aesthetics of any car lucky enough to be rocking a set of these! Their low-profile serrations feature an oversized outer diameter and narrow inner diameter offering up to 200% […]

The MSE Performance Parts straight plate is made to assemble all bulkheads aline to the chassis centre line. It connects not only left and right but also front and rear. It is easy to use even in between runs. It helps for a proper assembly and prevents any unusual behave of the car. It is […]

Last weekend the second race of the Nitro West Masters took place at the EVMC Velp track. Again Tobias Hepp was the man to beat. In qualifying he claimed the pole-position for the 40min final. At the start of the final Tobi was able to defend the pole-position and started to pull away immediately. After […]

Reedy’s new line up of Zappers DR batteries use state-of-the-art LiPo chemistry with advancements in construction that result in improved power output and internal resistance without sacrificing durability. Striving to improve all aspects of battery performance in the increasingly popular and competitive world of RC drag racing, Zappers DR batteries feature a 3.8V/cell nominal voltage, […]