Developed together with the Sworkz Team, RC-Project have produced these steering arm levers for the S35 family of cars. The new plates have been machined from Ergal 7075 T6 and black anodised. They sport 3 different holes mounting holes labelled ‘S’ Soft to be used in high grip conditions, ‘M’ Medium to be used as […]

Mugen have introduced the optional bypass shock body for their popular MTC2 touring car. Externally the same as the standard shock the inner surface sports additional machined channels which makes for a smoother and softer initial travel of the piston. When using this in the front of the car it makes the car smoother when […]

From Elliott Boots’ EBRC brand are these high grade carbon fibre steering arm levers used to adjust the Ackerman of the SWorkz S35-4 buggy. Following many months of testing they arrived at 3 options, distinguished by a dot system machined on each individual part, 1 dot, 2 dot and 3 dot. Depending on track layout […]

Adding to the Dash line of RS-tune V3 series variant is the 21.5T outlaw motor. The new generation features a high airflow arrow design with large openings in the machined aluminium can to guarantee maximum cooling efficiency, a lower weight and minimised power fading in high ambient temperatures. The redesigned stator helps to achieve a […]

For the XB8 & XB8E buggies, Xray have introduced this central dogbone drive shaft system which is an alternative to the CVDs that comes as standard. Central dogbone drive shafts for have reduced maintenance and servicing requirements and help provide more forward traction. All parts are machined from Hudy Spring Steel and are specially hardened. […]

Based upon their class revolutionising A800FX platform and the feedback from racers around the globe, Awesomatix have designed and created the new A800FX Evo FWD Touring Car. The main goal was to further enhance the performance in all conditions and increase the setup range to suit all track conditions. Since weight distribution is the main […]

From JConcepts their new curved pliers are very handy to the organised minded racer looking to have a lot of functions in a single tool. The 5-piece design consists of the dual pinching jaws, aluminium handles and steel centre pivot screw. The curved plier ends are machined in steel, chamfered to reduce weight, and have […]

From Hudy come these precision machined 15g pure tungsten chassis weight. The weight is smaller than the brass weights and is easier to install for a cleaner layout. The super small weight results in lower CG comparing to standard weights. Produced from very rare and heavy pure tungsten material, not a typical tungsten mixture, it […]

R1 Wurks introduce their new line of Mega and Micro capacitor for the Digital 3 ESC. The Mega cap was designed to maximise the performance of the Digital 3 ESC with more than 30x the capacity of the built in capacitors while delivering ultra low ESR performance. This means that these capacitors respond to the […]

From JConcepts and Ryan Maifield’s RM2 collaboration is this engine tuning screwdriver. The aluminium handle is custom machined, red anodised and spiced with 2nd operation silver highlighting to bring some luster to the pit area. The top of the wrench is capped with injection moulded JC plug and the handle itself is topped off with […]