Xray have introduced two new options for matched front coil springs for the X12’21 with black and gold joining the kit standard silver. The new springs offer a softer and harder option to the silver and have been developed through extensive testing and racing experience. Stiffness is controlled by the thickness of the wire and […]

From Sanwa, their new PGS-CLE servo is developed for use with low power supply BEC from the ESC. The BEC (Battery Eliminator Circuit) in some budget class ESC models sometimes cannot supply enough power for the servo. The PGS-CLE can work stably, even if it cannot receive enough power from the ESC. The servo is […]

From 7075.it comes these new front and rear upper arm mounting brackets for the Mugen MTC2. Made from hard anodised aluminium, there are 3 models available, 3 / -2, 2 / -1, 1 / 0, which will allow you to set any caster angle you want. Sold as a pair. Source: 7075.it [7075.it] FacebookTwitter The […]

Hudy have introduced additions to their line up of ultra light aluminium pinion gears. Joining the already extensive 64P range are 27T, 45T, 49T, 52T, 54T, 56T, 58T and 60T. The high-strength pinion gears are made from tough 7075 T6 aluminium and specially hard coated for superior strength, light weight and high durability. Extremely machined […]

From Matt Olson’s MOD brand for the 22 2wd series is these machined feather weight one piece steel pin drive outdrives. Manufactured in the USA by MIP it shaves 5.7 grams of rotational mass compared to the stock part. That 26% rotational mass will substantially increase your bottom end punch, lower motor temps and improve […]

Tamiya have announced an even further hopped-up chassis in the ever-evolving TA series, the TA08 Pro. This 2 belt-driven 4WD chassis features a Stepped V design for better weight balance and rigidity. This sees the battery as well as the electronics on the opposite angled towards the centre line at 10 degrees to prevent contact […]

Creation Model add to their line of Infinity branded carry cases with this parts carry case for safely storing and carrying differentials and shocks. Pre cut holes in the included foam insert make it ideal for IF14-II rear differential, IF15 front and rear differential and all types of shocks and even glow plugs. Source: Creation Model [creationmodel.net] […]

Hitec’s popular RDX charger line continues to expand with the introduction of the RDX2 Pro, a dual port AC/DC charger providing a whopping 260 watts of power. The RDX2 Pro features independent, 130-watt circuits, allowing you to charge two packs simultaneously. Its user-friendly jog dial easily scrolls through menus, making programming a breeze. Capable of […]

More new items from Exotek Racing for TLR22 based street eliminator cars. Firstly there are these precision machined titanium 12mm wide front hex axle set for +6mm overall wider width for more stability and less body roll. At only 4.5 grams per pair they are almost as strong as steel but nearly half the weight […]

Creation Model have released this Infinity setup board. A high-precision acrylic setting board that is a must have for checking your cars ride height and wheel alignment. This cool looking board features a special sticker with the Infinity logo and is available in vertical or horizontal layouts depending on your needs. Uses high quality 8mm […]